Question:
Could you please confirm which input pin would be desired for a pull up or pull down 5v digital signal.
Answer:
The easiest way to confirm which pin is suitable is simply to plug into the ECU with the MBE985 USB/CAN interface (basic mapping equipment MBE-MAP-KIT-3-CAN). Easimap 6 will then automatically select the correct .ec2 file to match the software as the ECU you are proposing to set up gearbox control with. You will then be able to go to programmable pins and look at the drop down option for each of the pins and see if this option is available.
Because software is continually updated and changing, new functions and options will become available over time and there is always a possibility that the software version that your ECU has different functions available and therefore this can only be confirmed by plugging into the ECU or having a copy of the map from the ECU along with knowing the software version the ECU is currently using.
This applies to all our MBE ECUs
Categories:
Easimap Software,
MBE Management Systems