LM-OTS-01 Instructions Add in wiring sub loom for oil temperature input for MBE9A4/9A8 ECUs Please be aware that Technical Support involving our Technicians is chargeable.

LM9A4-GSXR-M-OMS-2 Fitting Instructions The LM9A4-GSXR-M-OMS-2 wiring loom will suit all generations of Hayabusa engine. Please be aware that Technical Support involving our Technicians is chargeable.

Open Wiring Harness ECU Connector Instructions for how to open wiring harness/ECU connector to add pins or splice in wires.   Please be aware that Technical Support involving our Technicians is chargeable  

LM9A4-FWD/RWD Basic Wiring and Relay Information Includes relay information, interface colours, throttle pot wiring, lambda information, chassis ground instructions, battery positive information and coil connector pin outs.

Lambda 3 and 4 pin Wiring Instructions Important Note: If there is not a lambda sensor currently fitted or you wish to use a wide band lambda controller, your MBE ECU Lambda details will be disabled, therefore the MBE ECU will have to be returned to SBD Motorsport for calibration. The cost will depend on the ECU model & under...

9A4-9A8-992 to 985-973 CAN Interface Wiring

MBE9A4i Ignition Only Wiring Instructions

GWR-SBD Coil Pin Outs 2018 Please be aware that Technical Support involving our Technicians is chargeable

Boost Adapter Drawing for MBE9A4-9A8ECU Please be aware that Technical Support involving our Technicians is chargeable.

Barometric Adapter Drawing for MBE9A4-9A8ECU Please be aware that Technical Support involving our Technicians is chargeable.