Question :
I have a CAN based MBE ECU and I was wondering if you hade a base map for a K8 GSXR 1000 Suzuki. Any help would be appreciated, just want enough to get it up and running to make sure the loom is ok?
Answer :
Within Easimap 6 there are 3 sample base maps for each type of current model of MBE ECU (9A4, 9A8, 9A9), select the most suitable map and then load into your ECU and make small changes to suit your engine specification e.g. sample bike map is 24-1, yours maybe 24-2. All the information you require is detailed within each section relating to trigger wheel type and offsets.
If the ECU was supplied by us, it will normally be provided with a base map which is as close as possible to your engine specification or contact your supplier, if you require further help. We can provide more detailed support but this is chargeable at a rate £50 per half hour.
Category:
Easimap Software