Hydraulic Clutch Slave Cylinder 40mm
Heavy duty hydraulic clutch slave cylinder, this is designed for a 40mm internal diameter bearing. It has been annodised.
Clutch Release Mechanisms (Hydraulic Type)
The hydraulic release mechanism we supply is telescopic in design, working rather like a car radio aerial. This makes it very compacted & can be used in a large variety of applications. Currently the hydraulic slave cylinder is supplied in 2 types, the 40mm type is as its name implies suitable for a release bearing with a 40mm internal diameter, the other is the Saab type which suits a Saab sleeve. If you are fitting a different type of gearbox you will have to make your own mount made but in our experience this is a lot less hassle than persisting with a cable of rod operated system. There is also a selection of spacers varying thickness to allow you to set telescopic mechanism up to allow for a new clutch & to allow room for it to wear. If you are not sure how thick a spacer you require I normally recommend taking 2 of the largest spacers as they are cheaper than buying lots of small ones & you can always have a large spacer machined to the exact size you require.