Micro Switch Sealed For Launch Control with SureSeal Connector
This micro switch is used for launch control, which must be triggered when the clutch is fully pressed against the clutch pedal stop and activates the moment the pedal moves from the this position, when the driver begins to lift the clutch to engage the clutch. SureSeal connector already fitted.
Note: This switch is configured normally as a NC (normally closed) type set up.
For more information about Launch Control, please refer to the appropriate ECU details.
Note: This is not the same as the clutch switch (BRK-SWT-HYD-3/8S) for gearbox control, which detects the moment any pressure is applied to the clutch pedal.